Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Saw Wave Voltage Source: V_SAW



This signal source is superseded and should be replaced with one of the following: AC_V for voltage sources, AC_I for current sources, or PORT_SRC for ports, with the Signal parameter set to this signal type.

The period for tone 1 sources is the inverse of the specified simulation frequency; see “Frequency Sweep Control” for details.


Name Description Unit Type Default
ID Voltage source ID Text V1
AMP Open circuit signal magnitude Voltage 1 V
TF Fall time Time 0 ns
TD Time delay Time 0 ns
WINDOW Window type   DEFAULT[1]
Offset Waveform offset (does not affect DC) Voltage 0
DCVal DC value (used for DC analysis) Voltage 0

[1] Window type options are none (NONE), Lanczos (DEFAULT, ref [1]), Triangular (TRIANG), Hanning (HANN), Hamming (HAMM), Blackman (BLACK). See I_PLS for additional details on the WINDOW parameter.


This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice