TLINP simulates an ideal transmission line with loss. Mode propagating in line is specified by its effective dielectric constant and per-unit-length attenuation at a user-specified frequency. TLINP scales loss with evaluation frequency. By default, this model provides a partial account for circuit loss (insertion loss only). You can toggle the secondary parameter Total_Loss to access insertion loss, return loss, and dielectric loss (for example, for microstrips, stripline or other.)

Name | Description | Unit Type | Default |
---|---|---|---|

ID | Name | Text | TL1 |

Z0 | Transmission line impedance | Resistance | 50 ohm |

L | Transmission line length | Length | 0 um |

Eeff | Relative effective dielectric constant | 1 | |

Loss | Loss (dB/m) | 0 dB/m | |

F0 | Frequency for scaling loss | Frequency | 0 GHz |

*LossModel | Partial/Full account for conductor and dielectric loss | Partial | |

*TanD | Dielectric loss tangent | 0 | |

*Mur | Relative dielectric permeability | 1 | |

*TanM | Dielectric magnetic loss tangent | 0 | |

*Sigma | Dielectric bulk conductivity (S/m) | 0 | |

*EpsFreqDep | Dielectric constant is frequency dependent/independent | Frequency independent dielectric constant | |

*Fmin | Low roll-off frequency of Tand frequency dependence | Frequency | 1kHz |

*Fmax | High roll-off frequency of Tand frequency dependence | Frequency | 1THz |

*Fspec | Er and Tand are specified at this frequency | Frequency | 1GHz |

`* indicates a secondary parameter`

**Loss** and **F0.** Determine the
frequency-dependence of the attenuation constant. If F0 is not equal to zero (0.0), then

(dB/m) where `freq`

is the evaluation frequency. If F0 is
equal to zero, the attenuation is constant versus frequency and is equal to Loss(dB/m).

**LossModel** is a secondary control parameter that defines how
the model accounts for loss and dielectric parameters. If LossModel=Partial (default value) then
the model accounts for insertion loss (parameter Loss) only. If LossModel=Full then the model
accounts for insertion loss, return loss, dielectric loss, and for frequency-dependent model of
dielectric parameters (for example, for microstrips, stripline, or other).

**NOTE:** The secondary parameter LossModel displays when you
click the Show or hide secondary parameters button on the toolbar of the the
Element Options dialog box Parameters tab. If LossModel=Full, additional
secondary parameters display.

**EpsFreqDep** is a (hidden, secondary) control parameter that
defines if dielectric constant and dielectric loss tangent exhibit predefined frequency
dependence, suggested in [1]. This dependence is controlled by the three frequency parameters
Fmin, Fmax, and Fspec, and imparts causal behavior to the model.

This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.