Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Port with Fourier-Specified Signal (Tone N, Data File-Based): PORTSIGF_F



PORTSIGF_F is a signal source similar to PORTSIG_F but more general in that a fundamental tone and the frequency of the fundamental tone may be specified. See PORTSIG_F for details.


Name Description Unit Type Default
P Port number   1
Z Termination impedance Resistance 50 ohm
Pwr Available power DB Power 0 dBm
NET Signal data file name String "M"
Freq Frequency for tone N Frequency 1 GHz
Tone Tone number for the signal   2
WINDOW Window type   Default
PIN_ID Name identifier for pin Text  

Implementation Details

When using the PORTSIGF_F source, you are defining which tone sets use this signal file. You must be sure to have enough harmonics specified for that tone to properly capture all the components specified in the file. The port number P is set automatically. If PIN_ID is not empty, text displays on the pin when it is instantiated as a subcircuit.


This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice