Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Port with Fourier-specified Signal (Tone N): PORTSIGF

Symbol

Parameters

Name Description Unit Type Default
P Port number   1
Z Termination impedance Resistance 50 ohm
Pwr Available power DB Power 0 dBm
SIG Signal file name Text SQR_WAVE
Freq Frequency for tone N Frequency 1 GHz
Tone Tone number for the signal   2
WINDOW Window type   Default
PIN_ID Name identifier for pin Text  

Implementation Details

This element is similar to PORTSIG, but more general in that you can specify a fundamental tone and the frequency of the fundamental tone with the Tone and Freq parameters.

When using the PORTSIGF source, you are defining which tone sets use this signal file. You must be sure to have enough harmonics specified for that tone to properly capture all the components specified in the file.

Layout

This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice