Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Port with 2-Tone HB Source: PORT2

Symbol

Parameters

Name Description Unit Type Default
P Port number   0
Z Termination impedance Resistance 50 ohm
Fdelt Delta frequency (f2=f1+Fdelt) Frequency 0.1 GHz
Pwr1 Magnitude of power of tone one DB Power 0 dBm
Pwr2 Magnitude of power of tone two DB Power 0 dBm
*Ang1 Relative angle of tone one Angle 0 Deg
*Ang2 Relative angle of tone two Angle 0 Deg
PIN_ID Name identifier for pin Text  

NOTE: If a sinusoidal nonlinear source like this one has the parameter Ang=0 and is ideally terminated, then a nonlinear measurement (for example, Pcomp or Vcomp) made at the fundamental output of that source will have an angle of -90deg. This discrepancy is consistent with the definition of the sine wave sources (as in SPICE), and the Fourier-based harmonic component measurements. To avoid confusion, always measure or calculate the gain, and plot its angle.

Layout

This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice