Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Circuit Port: PORT



Name Description Unit Type Default
P Port number   0
Z Termination impedance Resistance 50 ohm
PIN_ID Name identifier for pin Text  

Implementation Details

This is a passive circuit termination that applies a load specified by Z. The port number P is set automatically. If PIN_ID is not empty, text is displayed on the pin when it is instantiated as a subcircuit.


This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice