Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

2 Coupled Microstrip Lines (EM Quasi-Static): M2CLIN

Symbol

Parameters

Name Description Unit Type Default
ID Name Text TL1
W1 Conductor 1 width - Nodes 1&&3 Length W[1]
W2 Conductor 1 width - Nodes 2&&4 Length W[1]
S Gap width 1&&2 Length W[1]
L Conductor length Length L[1]
Acc Accuracy parameter   1
MSUB Substrate definition Text MSUB1[2]

[1] User-modifiable default. Modify by editing under $DEFAULT_VALUES in the default.lpf file in the root installation directory. See the AWR Microwave Office Layout Guide for details.

[2] Modify only if schematic contains multiple substrates. See “Using Elements With Model Blocks” for details.

Implementation Details

This circuit component models a section of two edge coupled microstrip lines.

The parameters W1, W2 (strip widths), S (gap between strips), and L (line length) are dimensions entered in the default length units.

The parameter Acc is the accuracy parameter (1≤Acc≤10). The default value for Acc is 1. If Acc is less than 1 or greater than 10 it sets automatically to 2. Larger value of Acc increase density of mesh used in computations. Accuracy of model parameters may gain slightly from increasing Acc at the expense of noticeable growth of computation time. As a rule of thumb, good trade-off between accuracy and computation time is to set Acc to 1.

The parameter MSUB specifies the microstrip substrate element, which defines additional cross sectional parameters of the transmission line. If blank, a default is used.

This component doesn't impose restrictions on the conductor thickness (thickness may be zero, positive, or negative). Negative thickness means that the conductor is recessed into the substrate.

The component accounts for losses in metal and in substrate dielectric. Dispersion is not included.

NOTE: The implementation of EM Quasi-Static models heavily relies on the involved numerical algorithms. This may lead to the noticeable increase of computation time for some schematics that employ many models of this kind.

Layout

This element uses line types to determine its layout. By default, the layout uses the first line type defined in your Layout Process File (LPF). You can change the element to use any of the line types configured in your process:

  1. Select the item in the layout.

  2. Right-click and choose Shape Properties to display the Cell Options dialog box.

  3. Click the Layout tab and select a Line Type.

  4. Click OK to use the new line type in the layout.

See “Cell Options Dialog Box: Layout Tab ” for Cell Options dialog box Layout tab details.

See “The Layout Process File (LPF)” for more information on editing Layout Process Files (LPFs) and to learn about adding or editing line types.

References

[1] B. Bazdar, A.R. Djordjevic, R.F. Harrington, and T.K. Sarkar, "Evaluation of quasi-static matrix parameters for multiconductor transmission lines using Galerkin's method," IEEE Trans. Microwave Theory Tech., vol. MTT-42, July 1994, pp. 1223-1228.

Legal and Trademark Notice