Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Flicker Noise Current: I_FLICK

Symbol

Summary

I_FLICK models flicker noise current. This is a nonwhite noise source.

Parameters

Name Description Unit Type Default
ID Element ID   NS1
KF Flicker noise coefficient   1e-14
AF Flicker noise exponent   1.0
FFE Flicker noise freq. exponent   1.0
COMPAT Model compatibility selector   AWR (bias current)

Parameter Details

COMPAT. Allows toggling between different behaviors: the behavior corresponding to the Cadence® AWR® implementation of the model, COMPAT=AWR (bias current); the ADS compatibility mode of operation, COMPAT=ADS (noise amplitude modulation disabled); and COMPAT=Conversion matrix approach noise modulation.

Implementation Details

The flicker noise current flows through the N(I) branch and is dependent on the current in the I branch. The spectral density of the noise current, S(f), is

,

where Idc represents the DC component of the current in the I branch.

Layout

This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Legal and Trademark Notice