Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

Ideal Frequency Diplexer (Closed Form): DIPLEXF

Symbol

Summary

The DIPLEXF models and ideal, passive frequency diplexer. Two frequency ranges (low and high) are specified.

Parameters

Name Description Unit Type Default
ID Element ID Text DP
F1L Lower frequency cut-off for low band Frequency 0 GHz
F1H Upper frequency cut-off for low band Frequency 10 GHz
F2L Lower frequency cut-off for high band Frequency 10 GHz
F2H Upper frequency cut-off for high band Frequency 100 GHz

Parameter Restrictions and Recommendations

  1. F1L ≤F1H<F2L≤F2H

  2. F1L,F1H,F2L,F2H ≤0

Implementation Details

Implements an ideal frequency diplexer with the following 3-port S-parameter matrix:

Also:

If F1L = F1H, then S31 = S13 = 0 and S11 = S33 = 1.

If F2L = F2H, then S32 = S23 = 0 and S22 = S33 = 1.

Layout

This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.

Please send email to awr.support@ni.com if you would like to provide feedback on this article. Please make sure to include the article link in the email.

Legal and Trademark Notice