|R1||Input resistance||Resistance||0 ohm|
|R2||Output resistance||Resistance||1 ohm|
For a voltage applied between ports 1 and 2, the output voltage between ports 3 and 4 will be delayed by the amount specified in DELAY.
R1 is the resistance between ports 1 and 2, and R2 is the resistance between ports 3 and 4. If parameter R1 = 0, then R1 =∞.
This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.