|M||DC current gain||1|
|A||Phase offset||Angle||0 Deg|
|R1||Input resistance||Resistance||1 ohm|
|R2||Output resistance||Resistance||0 ohm|
|F||Break frequency||Frequency||0 GHz|
|T||Time delay||Time||0 ns|
Implements an ideal current-controlled current source with input resistance R1 across nodes 1 and 2 and output resistance R2 across nodes 3 and 4. The output current is given by
R2 resistance value of 0 means infinite impedance.
If F = 0, then gain has no frequency dependence.
This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.