|Q||Q at FQ||0|
|FQ||Freq at which Q is determined||Frequency||0 GHz|
|ALPH||Scaling exponent for Q||1|
|DCMod||DC modeling||Vector text (pull-down)||Lossless|
DCMod. Specifies the DC behavior of the model. Lossless indicates that the model is modeled as an ideal capacitor at DC. Lossy indicates that loss is taken into account at DC.
Implements a capacitor with frequency-dependent Q.
The admittance of the capacitor is given by:
In these equations, f is the simulation frequency.
NOTE: FQ must be greater than or equal to zero.
This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.