BPFC models represent lumped-element Chebyshev bandpass filters. The insertion loss ripples between zero and a specified maximum in the passband. The stopband attenuation increases rapidly and monotonically beyond the passband edges. This filter type offers simplicity and good selectivity.
Name | Description | Unit Type | Default |
---|---|---|---|
ID | Element ID | Text | BPFC1 |
N | Number of reactances in the filter | 3 | |
FP1 | Lower frequency edge of passband (when Qu is infinite). | Frequency | 0.5 GHz |
FP2 | Upper frequency edge of passband (when Qu is infinite). | Frequency | 1.5 GHz |
AP | Maximum passband attenuation (when Qu is infinite). | DB | 0.1 dB |
*RS | Expected source resistance. | Resistance | 50 ohm |
*RL | Expected load resistance | Resistance | 50 ohm |
*QU | Average unloaded Q of the lumped lowpass reactances. | 1e12 |
* indicates a secondary parameter
0 < N < 27
0 < FP1
0 < FP2
0 < AP Recommend AP greater than or equal to 0.001 dB.
0 < RS
0 < RL
0 < QU. Recommend QU less than or equal to 1e12.
The model is implemented as a short-circuit admittance matrix, whose equivalent transfer function squared magnitude is that of a Chebyshev filter:
where Cn is the Chebyshev polynomial of the first kind, and
and a lowpass-to-bandpass frequency transformation has been applied:
_FREQ is the variable containing the project frequency, and the admittances are:
This element does not have an assigned layout cell. You can assign artwork cells to any element. See “Assigning Artwork Cells to Layout of Schematic Elements” for details.
Note that this model behaves as if it has ideal impedance transformers at its ports, so there is no attenuation due to mismatched source and load impedances. The model expects that the source impedance will equal RS and that the load impedance will equal RL, but RS need not have any special relationship to RL for ideal transmission (as would normally be the case).