Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.
Antenna Patterns

To plot an antenna pattern, create a new measurement and, in the Data Source tab, set Primary > Qualifier 3 to Antenna Patterns. The Antenna Patterns are cross-sectional slices of the normalized radiated power on the far field sphere. The three types, XY, XZ, and YZ, each show a different slice; the XY antenna pattern shows the slice in the x-y plane, the XZ antenna pattern shows the slice in the x-z plane, and the YZ antenna pattern shows the slice in the y-z plane.

Please send email to awr.support@ni.com if you would like to provide feedback on this article. Please make sure to include the article link in the email.

Legal and Trademark Notice