Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

3.8.10. Blending Points of Polylines

To fillet/chamfer an interior point on a polyline:

  1. Create a sketch Polyline with corners at (0, 0), (1, 0), and (.5, 1).

  2. Press the Space bar or click Done.

  3. Click the Blend button and choose Fillet Points from the drop-down menu.

  4. Click the point at (1, 0), and press Enter.

  5. In the Edit Properties dialog box, set Radius to "0.2" and click OK.

Please send email to awr.support@ni.com if you would like to provide feedback on this article. Please make sure to include the article link in the email.

Legal and Trademark Notice