Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

3.8.7.2. Rotate

Description

Represents the motion of an element around an axis by a specified angle.

Parameters

Label – A unique name that identifies the transformation. (IElementOperation/Label)

Axis Point - [LENGTH] – A point on the axis of rotation. Defined in the sketch's coordinate system. (IElementRotation/AxisPoint)

Angle – [PHASE] – Angular extent of the Translation. (IElementRotation/Angle)

Include - Indicates if the operation is included in the regeneration process. (IElementOperation/Include)

Example(s)

User Interface Button

Command Details

Mouse click order is:
1. Select element(s)
2. Define Axis Point
See command hint for detailed instructions.

Example Creation Script

ElementRotation_2 = Element_1.Get_IElement().Rotate("Rotation_1", "-0.018, 0.012, 0", "30")

Scripting Interfaces

“IElementRotation”
“IElementCreationOperation”
“IElementOperation”

Please send email to awr.support@ni.com if you would like to provide feedback on this article. Please make sure to include the article link in the email.

Legal and Trademark Notice