Go to www.awrcorp.com
Back to search page Click to download printable version of this guide.

3.8.7.4. Reflect

Description

Represents the reflection of an element about a plane.

Parameters

Label - A unique name that identifies the transformation. (IElementOperation/Label)

Plane Point - [LENGTH] – Point on plane about which to reflect. Defined in the sketch's coordinate system. (IElementReflection/PlanePoint)

Plane Normal - Vector normal to plane about which to reflect. Defined in the sketch's coordinate system. This is a unitless vector and its magnitude is irrelevant. (IElementReflection/PlaneNormal)

Include - Indicates if the operation is included in the regeneration process. (IElementOperation/Include)

Example(s)

User Interface Button

Command Details

Mouse click order is:
1. Select Element(s)
See command hint for detailed instructions.

Example Creation Script

ElementReflection_2 = Element_1.Get_IElement().Reflect("Reflection_1", "0, 0, 0", "1, 0, 0")

Scripting Interfaces

“IElementReflection”
“IElementCreationOperation”
“IElementOperation”

Please send email to awr.support@ni.com if you would like to provide feedback on this article. Please make sure to include the article link in the email.

Legal and Trademark Notice